FAAC 415 Operator£344.00 Ex. VAT(£412.80 Inc. VAT)
(From 0 Reviews)


In Stock
(From 0 Reviews)
The FAAC 415 24V Single Kit is an electromechanical swing gate automation system designed for residential gates up to 2.5 metres wide, extending to 3 metres when fitted with a suitable electric lock.
Built around the FAAC 415 24V linear operator, the kit provides reliable automation for timber, steel and wrought iron swing gates. Its compact, above-ground design makes it suitable for new installations and upgrading existing manual gates where the pillar and hinge geometry allows a linear motor to be fitted.
The 24V motor is designed for frequent operation, with electronic force management and obstacle detection provided through compatible FAAC control equipment. Adjustable opening and closing speeds allow the gate movement to be configured to suit the installation.
The non-reversing gearbox helps hold the gate in position when stationary, while the manual release mechanism allows the operator to be disengaged when required. Optional battery backup can also be incorporated to maintain powered operation during a mains failure.
The FAAC 415 24V Single Kit provides a practical automation solution for residential driveways requiring a compact, dependable swing gate motor with modern electronic control.
1 × FAAC 415 24V Electromechanical Swing Gate Operator
1 × FAAC 24V Control Board and Enclosure
1 × FAAC Plug-in Radio Receiver
1 Pair × FAAC BUS Photocells
2 × FAAC Two-Button Radio Transmitters
Manufacturer: FAAC
Model: 415 24V Single Kit
Motor Voltage: 24V DC
Mains Supply: 230V AC via control equipment
Motor Type: Electromechanical linear operator
Maximum Gate Leaf Length: 2.5m without electric lock / 3m with electric lock
Piston Stroke: 300mm
Maximum Thrust: 2,800N
Maximum Rod Speed: 16mm/second
Gearbox: Non-reversing
Operating Frequency: Continuous duty
Protection Rating: IP54
Operating Temperature: -20°C to +55°C
Installation: Above ground
Gate Configuration: Single swing gate
Electric Lock: FAAC specifies an electric lock for gate leaves exceeding 2.5m, up to the maximum permitted 3m.
415 vs 415 L: The standard 415 operator has a 300mm stroke. The 415 L version provides a longer 400mm stroke for installations requiring different mounting geometry.
Battery Backup: Compatible battery backup equipment can be added separately to maintain powered gate operation during a mains failure.
| Brand | FAAC |
|---|---|
| SKU | 415 24V KIT S |
| Model | 415 |
| Automation For | Swing Gate |
| Operator | Arm |
| Type of Operator | Electromechanical |
| Double / Single Kit | Single |
| Voltage | 24V |
| Max. Width of Gate (m) | 4m |
| Warranty | 3 Years |
(From 0 Reviews)
(From 0 Reviews)
(From 0 Reviews)
(From 0 Reviews)
Cannot find what you are looking for?
Email today with a photo of your gate project and we can offer you advice and discounted prices.