FAAC S800 24V ENC CBAC 100° Underground Hydraulic Swing Gate Operator – 800kg (108720)£853.00 Ex. VAT(£1,023.60 Inc. VAT)
(From 1 Reviews)
In Stock
(From 1 Reviews)
The FAAC S800 24V CBAC Double Kit is a hydraulic underground swing gate automation system designed for residential and commercial entrances where discreet installation and reliable operation are required.
The underground design keeps the gate operators concealed beneath the entrance, preserving the appearance of decorative steel, timber and other swing gate designs. The hydraulic drive system provides controlled gate movement and is suited to installations where robust automation is required.
The CBAC designation identifies a hydraulic locking arrangement in both opening and closing directions, helping to hold the gates in position when the operators are not running.
The 24V configuration is intended for use with a compatible low-voltage control system. Compared with a conventional 230V arrangement, a suitable 24V system may offer additional control and battery-backup options, depending on the equipment supplied.
This double kit is intended for automating two swing gate leaves, with underground foundation boxes and the appropriate installation accessories.
Manufacturer: FAAC
Product Name: S800 24V CBAC Double Kit
Automation Type: Double Swing Gate
Operator Type: Underground Hydraulic
Motor Voltage: 24V – subject to confirmation of the exact operator model
Hydraulic Locking: Opening and Closing (CBAC designation)
Installation: Underground
Number of Operators: 2
Control Board: Compatible FAAC control board – exact model to be confirmed
Maximum Gate Leaf Length: Subject to the specified operator
Maximum Gate Weight: Subject to the specified operator
Opening Angle: Subject to the specified operator and installation arrangement
Manual Release: Operator-specific release mechanism
The kit configuration should comprise:
2 x FAAC S800 Underground Gate Operators
2 x Compatible Underground Foundation Boxes
2 x Operator Coupling / Collar Assemblies
Appropriate Manual Release Equipment
Compatible FAAC Control Board and Housing
Radio Receiver and Transmitters
Pair of Safety Photocells
The exact quantities, control board and accessory part numbers require confirmation against the supplier's kit specification before publication.
The S800 underground system requires correctly positioned foundation boxes, suitable drainage and gate hinges aligned with the operator's installation geometry.
The hydraulic locking arrangement must be considered alongside gate dimensions, wind loading and any additional locking requirements.
A 24V operator must be paired with a compatible control board. It must not be connected directly to a 230V motor output.
The installation must be risk assessed and fitted with appropriate safety devices, including photocells and safety edges where required.
| Brand | FAAC |
|---|---|
| SKU | S800 CBAC KIT |
| Model | S800 |
| Automation For | Swing Gate |
| Operator | Underground |
| Type of Operator | Hydraulic |
| Double / Single Kit | Double |
| Voltage | 24V |
| Max. Width of Gate (m) | 2m |
| Warranty | 3 Years |
Excellent service, the FAAC gate motor which I ordered was delivered in less than 24 hours, and I’m near the Scottish border. It was also at a good price and a VAT receipt. FAAC make very good quality gate motors, or they did , as the one I’ve just replaced is about 30 years old.
Cannot find what you are looking for?
Email today with a photo of your gate project and we can offer you advice and discounted prices.