FAAC E145S 230V Gate Control Board – 790076

Description

The FAAC E145S is an advanced 230V control board for automatic swing and sliding gates, designed to control one or two swing gate operators, a sliding gate motor or mixed swing/sliding automation systems.

It features a wide-range switching power supply which automatically accepts input voltages from 90V to 260V, together with BUS 2easy connectivity, LCD programming and compatibility with FAAC Simply Connect.

Two independent safety edge inputs allow 8.2kΩ resistive safety edges to be connected directly to the board without requiring an additional safety edge controller.

The E145S can control up to 800W of motor load and provides extensive programming options for gate movement, safety devices, electric locks and accessories.

FAAC part number 790076.

Key Specifications

Manufacturer: FAAC
Model: E145S
SKU / Part Number: 790076
Product Type: Gate automation control board
Application: Swing and sliding gates
Swing Gate Motors: 1 or 2
Motor Voltage: 230V
Input Power Supply: 90–260V AC, 50/60Hz
Maximum Motor Load: 800W
Standby Consumption: 4W
Sleep Mode Consumption: Less than 2W
Accessory Supply: 24V DC
Maximum Accessories Load: 500mA
BUS 2easy Supply: 500mA
Safety Edge Inputs: 2 independent inputs
Resistive Safety Edges: 8.2kΩ supported
Programming: LCD display and push buttons
Simply Connect: Compatible
BUS 2easy: Yes
USB: USB-A
Operating Temperature: -20°C to +55°C
Status Indication: LCD display and LEDs

Main Features

Wide-range 90–260V switching power supply
Controls one or two 230V swing gate operators
Can control a compatible 230V sliding gate operator
BUS 2easy accessory connection
Two direct safety edge inputs
8.2kΩ resistive safety edge compatibility
LCD display and push-button programming
Simply Connect compatibility
Programmable outputs
Electric lock outputs
Compatible with traditional and BUS photocells
Compatible with 3-pin, 5-pin and external radio receivers
USB-A connection for firmware/configuration functions

Replacement / Upgrade Information

The FAAC E145S 790076 replaced the earlier FAAC E145 790006 control board.

The E145S 790076 has subsequently been replaced by the newer FAAC E145S LC, part number 790306.

If replacing an existing E145 or E145S board, check the radio receiver and accessories installed on the existing system before ordering, particularly when moving to the newer E145S LC.

What's Included

1 x FAAC E145S Control Board – 790076

Control board enclosure, radio receiver, Simply Connect module and other accessories are not included unless stated separately.

Installer Note

The E145S provides direct inputs for opening and closing safety edges, allowing compatible 8.2kΩ resistive edges to be connected without an additional edge controller.

Unlike the earlier E145, the E145S does not have a USB-B connection for direct laptop programming with the older EasyBoard software. Advanced connectivity and remote programming can instead be provided through FAAC Simply Connect, while USB-A is retained for compatible configuration and firmware functions.

For a new installation or replacement where 790076 is no longer available, check the newer FAAC E145S LC 790306.